Water mitigation prevents the damages that water poses from spreading out farther by eliminating the water while also drying out the affected portions of the room. There is really no standard way in which this happens. That is due to the unique and complicated nature of each spate of water damage.

Be this as it may, there are some unifying steps and procedures that cut across the board. It is necessary for you to know about these steps to do a great job. We have seen it wise to draft and dedicate the entire length and breadth of this article towards the steps you may have to take to accrue the necessary ends.

WATER MITIGATION PROCESS

Below are some of the common steps you may take to mitigate water damage:

Step I: Inspect the property

The first and foremost step to take is to inspect the piece of the property concerned to assess the degree of the water damage. You will use the meter gauge extensively to assess the severity of the water damage. If there is too much water, you will definitely employ more sophisticated equipment and a higher level of expertise.

With regards to the sources of water, the damages may be categorized in the following:

  • Category I: Caused by clean water like the toilets, burst pipes, and overflowing sinks.
  • Category II: Inflicted by water whose sources contain some other ingredients like detergents and dissolved minerals. It is also called ‘gray water.’
  • Category III: Popularly called ‘Blackwater,’ this derives from unclean water such as those from sewages, rivers, and pools that have plenty of bacteria.

As pertains to the extent or the severity of the water damages, the results of the inspections may be categorized into the following classes:

  • Class I: It signifies the lowest amount of water damages usually affecting only a small portion of the room.
  • Class II: Refers to water damage that impacts the whole room including the carpets and the walls.
  • Class III: Is hailed as the worst type. It impacts the walls and the ceilings not to mention comprising wholly saturated.
  • Class IV: Arises when certain materials sustain damages and demand the use of specialized pieces of equipment to dry them.

Step II: Eliminate the excess water and dry the home

After assessing the extent of the water damage and ascertaining the class and the category of the water damages, you now have to eliminate the excess water and dry the home. How you go about this is mainly dependent on the category of the water damage you identify as well as the severity thereof.

You will first and foremost have to identify the right piece of equipment for the job then formulate the relevant strategy to employ to do the trick. Some of the pieces of equipment that may come to your rescue are the vacuum, pumps, heavy-duty fans, dehumidifiers, and air scrubbers.

The exact way you go about this will be dependent on the nature of the affected surface, how exposed or hidden the affected part of the room or furniture is, and the kind of equipment you are using to tackle the end result. This stage, being critical, may call for expert assistance.

Step III: Remove the damaged items

If the water damage has affected the interior furnishings and fittings, you may have to start by removing them from the room. Get someone to help you to carry them out of the room to the verandah or the backyards safely. Go about this issue slowly and steadily to prevent damaging the items altogether.

Examples of the items you will want to get outside are carpets, drywall, furniture, and interior home assets. Place them at a location that is exposed to the sun, wind, and other elements of outward weather conditions. The purpose of this is to allow for smoother and natural drying.

Step IV: Repair and maintain the building structures

There is no better time perhaps to repair and maintain the building structure than this one. Most items take too long to dry out. The situation gets compounded in the extremely cold winter months that experience low levels of ambient sunshine. This leaves lots of time at the disposal of the homeowners.

At this time, we recommend that you inspect the building and identify those areas that may require further repairs. This could be the broken windows, perforated ceilings, cracked walls, and burst pipes to name but a few! Let the technician inspect and mend these areas as properly as can be.

Step V: Determine what to do thereafter

After dealing conclusively with the water damage, you now have to determine what to do thereafter. Should you repair or replace the damaged items? Could you also take advantage of this time to upgrade the pieces of equipment by attaching extras and other things that may up their performances?

FUN FACTS:

Here now we leave you with some relevant fun facts:

  • The length of time the water may take to dry depends mainly on the severity of the water damages
  • Generally, a typical drying process takes roughly 72 hours
  • Molds occur if the property remains damp for 24 straight hours
  • Mold removal should typically follow the drying process
  • The entire process of removing excess water and restoring the property takes three weeks

CONCLUSION

Even though this is a task that many homeowners can comfortably tackle, it is best delegated to professional water damage companies. Reason? The task requires the use of strong and sophisticated pieces of equipment. At the same time, it also demands a fairly high level of expertise.

It is highly unlikely that the average homeowner may supply these two vital ingredients. Perhaps the best way to go about this is to start by finding a great company in your area. Consult the local directories and other business search engines to narrow to the best companies that operate in your area.

Leave a Reply

Your email address will not be published. Required fields are marked *