Water well Drilling

Getting to know more about the water well drilling is a noble thing to do as it equips you with the know-how you need to appreciate the activity deeper and also build quality wells. We are aware of this fact deeply that is why we have seen it necessary to dedicate the entire article to that.

In our discussions below, we shall examine the subject from all sides and angles. Among others, we shall look into the water well drilling, the kinds of equipment used to articulate it, some of the leading companies that engage in it, and a couple of frequently asked questions about it.


It is the activity of cutting the rust of the earth in a bid to extract the underground water. The activity employs the drilling machines that have sharp-pointed teeth that pierce the soils to get to the depths of the holes. At the conclusion of the drilling exercise, the hole is lined using a casing to prevent the walls from collapsing or caving in.


NOT every area is suitable for drilling wells. For an area to qualify, it must meet the following pre-conditions:

Strong and compacted soils

The soils have to be strong and compacted. That is to guarantee that the wells are stronger and less likely to cave inwards even under extreme pressure. Examples of soils that are great for well drilling are clay and loam. These soils have to be anchored on powerful rocks for added support.

Higher water tables

For your own convenience when drilling, you need the area concerned to have a higher water table. That is to prevent you from having to dig too deep and also spare you unnecessary efforts along the way. Some surveying companies have the ability to gauge the depths of water in the areas.

Far away from contaminants

Needless to say, the area has to be far away from contaminants like raw sewage, dumping sites, and other things that can compromise the quality of the water that is extracted from the soil. You do not want to imperil the health of the people who eventually consume that water.

No less than 2 feet from built-up areas

Lastly, the area has to be no less than 2 feet from the built-up areas. The purpose of this arrangement is to prevent the adjacent buildings from sustaining cracks and other forms of damages when the well is dug or maintained at a later date. It also spares the foundation from the water damages that come along.


Expect to pay the following amounts for your well drilling costs:

Average depth

Most wells have an average depth of 150 feet. Such depths cost around $5,500. The exact cost may vary considerably though depending on the difficulty of the terrains and the nature of the soils at hand. It is up to you to compare prices before settling on a suitable contractor.

Average costs

All factors considered, you should expect to part with around $1,500 and $12,000 to dig a well of your choice and liking. As stated earlier, the exact cost of drilling the well depends on such factors as the depth of the well, the precise area wherein the well is located and the prevailing environmental conditions.

Difficult terrains

Drilling wells in difficult terrains is never easy given that you will usually have to apply more effort and expend more money to repair and maintain the wells. For them expect to pay around $50 per foot of depth. For your own added peace of mind, you want to emphasize more durable equipment.

Shallow terrains

Shallow terrains are on the whole very easy to scale. They subsequently cost cheaper to tackle compared to their difficult terrains counterparts. You should be prepared to part with around $10 and $25 per square foot to drill your holes in them. This, as you may see, is somewhat cheaper to come by.


To drill your water from the well, you need the following pieces of equipment:

Well rigs

The well rigs are by far the most significant drilling equipment. They are the ones that penetrate the soils to crush the earth’s crust and churn out the soils to the surfaces. It is the rigs that are the single most significant piece of drilling item in use.

Injection systems

Injection systems are used to dispose of the soils and the debris that is extracted from the holes. They negate the use of the shovels and the spades to eliminate the debris and thus make the work a little bit easier. With them at your fingertips, you are sure to do a clean job considerably.

Hammer lubricators

As the designation implies, the hammer lubricators do the job of making the parts operate smoother without any frictions or issues that may imperil the smooth movements thereof. They basically furnish the lubes to the joints to minimize the friction that potentially arises from rubbing actions.

Mud systems

It is not uncommon for the wells to produce mud when being drilled. The mud systems exist to mitigate the adverse effects of the outputs. They basically neutralize the severity of the mud output to bring forth safer and cleaner drilling outcomes for you. These come in handy mainly in areas that are prone to mud and heavier rainfalls.

Auxiliary winches

The auxiliary winches are mainly used to tighten the parts of the drilling machines. They serve hence to confer the degree of tautness and stability that the drilling machines require to do a great job. In that way, they prevent any unnecessary accidents that may potentially arise with use.


Water well drilling equipment rentals are companies that lease the drilling machines to third parties and individuals. They enable people to enjoy the benefits that come along but without the need to invest heavily in the pieces of equipment that are necessary for the jobs. Try them out if you lack the financial muscle power but would nonetheless want to enjoy the benefits these items bring along.


Here is a rich list of companies those offer water well services

Below are the leading water well drilling companies across America:

A. Water well drilling companies in Bakersfield California

a.) Bakersfield Well & Pump Co

Address: 7212 Fruitvale Ave, Bakersfield, CA 93308, United States,

Renown Well Pump Service provider

Phone: +1 661-393-9663

b.) California water drilling

Address: 1801 Brundage Ln, Bakersfield, CA 93304, United States

Phone: +1 661-221-1370

c.) Nor-Cal Pump & Well Drilling, Inc.

Address: 3600 Ethyl St, Bakersfield, CA 93308, United States

Phone: +1 559-237-3500

B. Water well drilling Granbury TX

a.) Dowell Water Well Drilling

Address: 1202 Spur Ct, Granbury, TX 76049, United States

Phone: +1 817-579-5952

b.) Associated Well Services Inc.

Address: 1215 US Hwy 67, Granbury, TX 76048, United States

Phone: +1 817-573-6022

c.) Anderson Drilling Report

Address: 1315 Water’s Edge Dr, Granbury, TX 76048, United States

Phone: +1 817-573-8111

C. Water well drilling Abilene TX

a.) The Honey Do Service of Abilene – Handyman & Home Improvement

Address: 1321 S Danville Dr, Abilene, TX 79605, United States

Phone: +1 325-701-7946

b.) Leonard Water Services

Address: 6799 US-277, Abilene, TX 79601, United States

Phone: +1 325-673-6778

c.) Munden Water Well Services

Address: Abilene, TX 79602, United States

Phone: +1 325-201-1634

NB: For well drilling near me, you may have to consult your directory for further guidance.


To become a drilling contractor, you must:

  • Acquire a ‘Certificate of Registration’ yearly from the Department of Environment
  • Pursuant to this, you must have pursued a drilling-related course from a reputable institution of learning
  • Some jurisdictions demand that you possess the prior working experience to qualify
  • Yet some also levy charges and fees when applying or renewing membership

NB: Check with your local area to find out the exact requirements


We now answer some of the frequently asked questions with regards to this wonderful subject:

How much does it cost per foot to drill a well?

To drill a well, you should expect to part with around $5,500 per average depth of around 150 feet. The amount may shoot up if the terrain in question is too difficult and heavy. That is due to the need to tackle the extra levels of thickness and maintain a great quality workout.

Is water well drilling dangerous?

YES, it is! There is the potential of the hole collapsing and imperiling the health of those who are around you. Also, the pieces of equipment concerned may themselves pose some hazards to the users by way of endangering their lives or possibly cutting the limbs.

How deep should a well be for drinking water?

It all depends on the water table in the exact place or area you want to dig the well. Areas that are next to oceans, rivers, lakes, and water bodies tend to have a higher water table. The wells in such areas are not as deep as those that are located deep in the hinterlands or interiors.

What is involved in drilling a water well?

The typical drilling process goes through these simple steps:
Insertion of the drill bit in the soil
Rotating the bit to pierce the hole
Disposing of the waste soils onto the ground
Plastering the holes to make the same stronger and enduring

How many years does a water well last?

Roughly 30-50 years. The longevity of the well depends on several factors though. These include the depth of the well, the nature of the soil whereupon the well is dug. You are also strongly advised to upgrade the well when it gets to 20 years of age.

Is 2 gallons per minute a good well?

NOT really! Most average homes need 100 to120 gallons per person each day. A flow rate of about 6-12 gallons per minute would hence be suitable. That means 2 gallons per minute is completely way off the mark for you. You may need to up your game considerably to manage the desired water flow rate.

How far does a well need to be from a house?

Around 2 feet would be desirable. This is to prevent the water damages that may usually arise when the water is drawn from the well. Also, this comfortable distance lets the water get to the drains smoothly without disturbing the adjacent structures or the soil drainage.

Can I drill my existing well deeper?

YES, but you will require more powerful machines to do this job for you. The most precise tool to use here is the drilling machine that gets to greater depths. Such a machine has to be powered and automated to unparalleled operations all the while of engagements.

Is 1 g.p.m good for a well?

NOT really! Not unless you merely want to furnish water for the small and light household chores like washing the cars and keeping the home clean. This rate is too low to meet the demands of a typical average household. It leads to longer waiting times that may inconvenience the users.

Does well water run out?

YES, it does! Certain environmental circumstances like drought, failed rainfall, prolonged periods of dryness and poor soils have largely been known to cause the wells to dry out too soon! In such areas, you are asked to dig deeper to tap into more underground water.


Our long and in-depth peek into the water well drilling subject matter comes to an end there. Go for the well drilling exercise hence. It is our firm knowledge and pleasure that you are now properly equipped for the job. An in-depth reading of our descriptions above will equip you further.

Leave a Reply

Your email address will not be published. Required fields are marked *